Vandal Resistant Push Front Soap Dispenser - Boxed Liquid Soap
The AA-SD-PF-CDCR vandal proof locking soap dispenser is constructed of heavy duty stainless steel that will stand up to abuse and corrosion. The Vandal Proof Push Front Soap Dispenser is perfect for situations where vandals have repeatedly struck and caused costly damage to your public bathroom facilities.
Spec Sheet (PDF) (Note... Specsheet is shown for the VSP-SD-PF which is identical product but not specced for CDCR. All measurements are the same.
Public Restroom Facility Designed For:
The AA-SD-PF-CDCR is suitable for all public restroom facilities.
The VSP-SD-PF is available in 12 and 14 gauge Stainless Steel that will stand up to heavy use, abuse and vandalism. The unit is also very strong because of its compact design and small surface area. The VSP-SD-PF is ready to withstand the abuse of baseball bats and size 12 sneakers.
This product is available in 304L Stainless Steel and 316L Stainless Steel. For most restroom facilities, 304L is the most cost effective solution. It provides good corrosion resistance in non-salt water environments. 316L is preferred by our customers that are located near or on the ocean. Navy ships and public facilities at beaches should opt for the 316L material.
The AA-SD-PF-CDCR is designed to accommodate most pre-packaged 800 ml / 27 oz liquid boxed soap.
The AA-SD-PF-CDCR toilet paper dispensers is ADA compliant when properly mounted and installed.
Customers of this Product:
Customers of this product include Public Schools, Parks, National Forest Service, California Department of Transportation (CALTRANS), and the United States Navy.
Made in USA
Uses Prepackaged Liquid Box
Industry Leading Warranty against Vandalism
- 4 ⅞” x 12 ¼” x 3 ¾” (WxHxD)
12-gauge 304L Stainless Steel
14-gauge 304L Stainless Steel
12-gauge 316L Stainless Steel
- Stainless Steel Satin # 4 Finish
- 3/8” Surface Mounting Hole Placements
Secure fixture to wall with appropriate 3/8” stainless steel anchoring hardware for optimal installation strength (not provided). Recommend 3⁄4” or greater back bracing for walls.
Dispenser shall be constructed with American made, 12 gauge 304L or 12 gauge 316L Stainless Steel joined /w TIG welds and edges de-burred. Dispenser shall not be cross-metal contaminated during manufacturing construction. Dispenser housing shall provide protective cover for automatic foaming dispenser mechanism. Dispenser shall be locked by cylinder keylock. Dispenser shall have 3⁄8” mounting holes. 12 Gauge models shall include a 10 year standard or 20 year optional functional warranty against vandalism when properly installed & locked while in service. 316L SS shall be used for US Navy maritime use or if exposure to salt water is prevalent.
No customer reviews for the moment.
I work as a contractor for a high profile client in the south. We had an issue with the public taking JRT rolls to the tune of...