Vandal Resistant Outlet Lock Box w/ Cylinder Lock
Our Tamper-Proof 2-Gang Electric Receptacle Lock Box, equipped with a cylinder lock, offers superior protection for electrical outlets in commercial and public settings. Constructed from robust stainless steel, this lock box is designed to prevent unauthorized access and vandalism to 2-gang receptacles. Its heavy-duty design and additional security of a cylinder lock make it an ideal choice for environments requiring enhanced safety measures. This outlet lock box is a crucial component for maintaining the integrity and security of electrical systems, ensuring a safe and reliable electrical supply.
Note 1: Receptacle outlet is not included with the housing. Most boxes on the market should fit but a known recepctale box that was tested to fit, click here.
Warranty Guide, Care Instructions & Spec Sheet - See Spec Sheet Tab Below
Ideal Facilities:
- Public Parks: To securely manage electrical access for lighting and public events.
- Educational Institutions: Safeguarding electrical receptacles across school and university campuses.
- Transportation Stations: Protecting electrical points used for lighting and information boards at bus and train stations.
- Municipal and Government Buildings: Ensuring secure electrical access for public events and lighting.
- Recreational Areas: Managing electrical access for lighting and amenities in playgrounds and beach areas.
- Retail Centers: Ensuring secure electrical access for vendors and lighting in shopping malls and markets.
- Gas Stations: Protecting electrical access points in service areas and car wash stations.
- Sports Venues: Securing electrical access for lighting and vendor services in stadiums and arenas.
- Outdoor Event Spaces: Managing secure electrical access for concerts, festivals, and outdoor events.
- Community Centers: Ensuring secure and reliable electrical access for community events and gatherings.
- Healthcare Facilities: Managing secure outdoor electrical access for lighting and emergency services.
- Industrial Zones: Protecting electrical access points in outdoor industrial and warehouse areas.
- Residential Complexes: Safeguarding electrical access in communal outdoor spaces within residential areas.
- Cultural and Exhibition Venues: Ensuring secure electrical access for outdoor exhibits and events in museums and galleries.
- Shelters and Support Centers: Homeless shelters, rehabilitation centers, and community support facilities.
- High-Risk Areas: Locations frequented by individuals prone to vandalism, such as certain public restrooms and unsupervised public spaces.
Features:
- Vandal Resistant: Engineered to withstand tampering and unauthorized use.
- Spray and Drip Deflective: Designed to protect electrical components from water exposure.
- Out of Sight Keyed Cylinder Lock (accessed from bottom): Providing discreet and convenient security.
- Surface Mounted: Ensuring secure placement and ease of installation.
- Fits Standard Size 2-Gang Outlet Plug (not included): Providing compatibility and practical application.
- Corrosion Resistant: Ensuring durability and longevity in various environmental conditions.
- Allows for Extension Cord Use While Locked: Maintaining functionality without compromising security.
- Industry-Leading Warranty Against Vandalism: Protecting your investment and ensuring product longevity.
- Accommodates 1/2" and 3/4" Conduit: Offering versatile options for electrical installations.
- Crafted from 12-gauge 304L or 316L Stainless Steel: Ensuring robust and durable construction.
Alternate Names:
- Vandal Resistant 2-Gang Electrical Lock Box
- Outdoor Electrical Receptacle Protection
- Division 10 Specialties Lock Box
- Corrosion-Resistant Electrical Box Cover
- Surface Mounted Electrical Outlet Shield
- Keyed Cylinder Lock Electrical Box
- Secure Outdoor Electric Receptacle Solution
- 2-Gang Electrical Box with Extension Cord Slot
- Industry-Leading Warranty Electrical Box
- Discreet Lock Outdoor Electrical Box
- 12-Gauge Stainless Steel Electrical Box
- Tamper Resistant Locking Outlet Cover
Dimensions:
- Exterior: 6 ½” x 8 ½” x 4 ⅛” (WxHxD)
- Interior: 5 ¼” x 6” x 3 ⅝” (WxHxD)
Material Options:
- 12-gauge 304L Stainless Steel
- 12-gauge 316L Stainless Steel
Model Names:
- AA-EB-7R-304L-12g
- AA-EB-7R-316L-12g
Finish:
- Stainless Steel Satin # 4 Finish
Mounting:
- 3/8” Surface Mounting Hole Placements
Capacity:
- Standard 2-Gang electrical box (not included)
Weather Proofing Note!:
While this will protect the electrical box from the elements, it is only rated for security protection and not weather proofing. If installed outdoors, the electrical box it is protecting must already be a weather proof design to meet code requirements.
Installation:
Secure fixture to wall with appropriate 3⁄8” stainless steel anchoring hardware for optimal installation strength (not provided). Recommend 3⁄4” or greater back bracing for walls. Partitions may require T-nuts or other suitable anchoring devices. When possible it is recommended that units be through bolted back to back providing optimal installation strength.
Installation Note:
Due to the many different types of gang boxes available on the market, we cannot pre-drill mounting holes for install. This will require either double sided tape (not provided) or the drilling of mounting holes to attach the gang box securely to the inside of the security box.
Guide Specification:
Security Box shall be constructed with American made, 12 gauge 304L or 12 gauge 316L Stainless Steel joined /w TIG welds and edges de-burred. Security Box shall not be cross-metal contaminated during manufacturing construction. Security Box shall provide protective cover against drip and spray. Protective shroud adds security for padlock. Dispenser shall have 3⁄8” mounting holes. Security Box shall accommodate standard sprinkler timer styles. 316L SS shall be used for US Navy maritime use or if exposure to salt water is prevalent.
Warranty Key (See Website for Details)
Made to Order Items
All of Vandal Stop Products are made by hand in the USA using American-sourced stainless steel. While some products might be available in stock, most are made to order. Our general estimated lead times are:
- Quantity 1 - 10 = ~4 to 6 weeks for production
- Quantity 11 - 50 = ~4 to 8 weeks for production
- Quantity 51 - 100 = ~6 to 10 weeks for production
- Quantity 101 - 200 = ~10 to 16 weeks for production
- Quantity 200+ = Call for estimate
Winter Months Production
Due to holidays and winter weather, some production delays may occur during the months of November, December, January, and February.
Supply Chain
Due to increased demand, more time be required for production. If you have a critical delivery date requirement, please call or email to verify lead times prior to placing an order.
Stocked Items
For certain items that we sell often, we do our best to either keep inventory on the shelf or keep a constant production cue going. For items that are considered "stocked" we will generally be able to ship within 5 business days or less.
Why Are Stocked Items More Expensive?
We're adapting to your needs! While we specialize in made-to-order products, we recognize the growing demand for immediate availability. Adjusting to this requires foresight in demand anticipation, material procurement, initiating stock production, and warehousing—all incurring additional costs. Consequently, our stocked items are priced to reflect these overheads. For customers who can accommodate a production lead time, we're pleased to offer discounted pricing as a thank you for your flexibility.
Billing
Credit Card orders will be charged at the time of checkout. If you wish to be billed when your order ships, you can use the "Pay by Purchase Order" option on the payment section of checkout. You will be asked to upload a PDF copy of your Purchase Order along with a reseller certificate of tax exempt status is applicable. We will invoice you once your order has been shipped.
For more information, contact us or read our full Production Lead Times Policy.
AA-EB-7R - Spec-Sheet, Warranty, Care Instructions & Mounting Guide