Vandal Proof Three Roll Commercial Toilet Paper Holder
Our Vandal-Proof Three-Roll Shrouded Stainless Commercial Toilet Paper Holder is the perfect blend of functionality and security for busy restrooms. Constructed from high-quality stainless steel, this anti-vandal dispenser holds three rolls, ensuring a consistent supply. The shrouded design effectively prevents theft and vandalism, while its capacity makes it ideal for high-traffic environments. Offering a 10-year warranty, this dispenser is a long-term solution for maintaining cleanliness and efficiency in any commercial setting.
Warranty Guide, Care Instructions & Spec Sheet - See Spec Sheet Tab Below
Anti-Vandalism Features:
- Vandal Resistant: Engineered to withstand intentional damage and unauthorized access.
- High Capacity Design: Ensuring continuous availability of toilet paper in high-traffic areas.
- Made in the USA: Assuring quality and supporting domestic manufacturing.
- Drip Deflective: Protecting the paper and internal mechanisms from water damage.
- Shroud Protected Padlock: Offering an additional layer of security against vandalism.
- Surface Mounted: Ensuring ease of installation and secure placement.
- Accommodates Multiple Paper Styles: Providing flexibility and convenience for varied paper roll types.
- Corrosion Resistant: Offering longevity and durability in various environmental conditions.
- Industry Leading Warranty Against Vandalism: Protecting your investment and ensuring product longevity.
- Available in 12-gauge 304L, 316L, or 16-gauge 304L Stainless Steel: Offering options for robust and durable construction.
Green / LEED / Sustainability
At Vandal Stop, we are committed to providing products that contribute to sustainable building practices and support LEED certification. Our range of vandal-proof products, including toilet paper dispensers, paper towel dispensers, soap dispensers, and mirrors, are designed with the environment in mind.
Key Sustainability Features:
- Durability and Longevity: Our products are built to withstand high-traffic and high-vandalism environments, reducing the need for frequent replacements and minimizing waste.
- Recyclable Materials: We use materials that are fully recyclable, with a special emphasis on stainless steel, which is 100% recyclable an infinite number of times, ensuring minimal environmental impact at the end of the product's life cycle.
- Low Maintenance: Designed for easy maintenance and long-term use, our products help to lower the overall environmental impact by minimizing the need for cleaning agents and resources.
- Reduced Resource Consumption: Our dispensers are engineered to optimize usage, reducing waste of paper and soap, and promoting efficient use of resources.
- Support for LEED Certification: Vandal Stop products can contribute to LEED points in various categories, including Indoor Environmental Quality, Materials and Resources, and Innovation in Design.
By choosing Vandal Stop products, you are not only investing in high-quality, durable solutions but also supporting a more sustainable future.
For more detailed information on our sustainability efforts and how our products contribute to green building practices, please visit our Green/LEED/Sustainability page.
Public Restroom Facility Designed For:
- Commercial Buildings: Such as shopping malls, office buildings, and retail stores.
- Public Facilities: Including parks, transport terminals, and recreational areas.
- Educational Institutions: Schools, colleges, and universities.
- Healthcare Facilities: Hospitals and clinics.
- Hospitality Venues: Hotels, restaurants, and resorts.
- Event Venues: Stadiums, concert halls, and exhibition centers.
- Government Buildings: Courthouses and municipal offices.
- Industrial Facilities: Factories and warehouses.
- Shelters and Support Centers: Homeless shelters, rehabilitation centers, and community support facilities.
- High-Risk Areas: Locations frequented by individuals prone to vandalism, such as certain public restrooms and unsupervised public spaces.
Alternate Names:
- AA-HRTDx3E Vandal Resistant Toilet Paper Holder
- High Capacity Three Roll Stainless Toilet Paper Dispenser
- Commercial Stainless Steel Toilet Paper Holder
- Made in USA Toilet Paper Dispenser
- Drip Deflective Commercial Toilet Paper Holder
- Shroud Protected Padlock Toilet Paper Dispenser
- Surface Mounted Stainless Steel Toilet Paper Holder
- Corrosion Resistant Toilet Paper Dispenser
- Industry Leading Warranty Toilet Paper Holder
- Multi-Paper Style Compatible Dispenser
- Heavy Duty Industrial Grade Toilet Paper Holder
Corrosion Resistance:
This commercial toilet paper holder is available in 304L Stainless Steel and 316L Stainless Steel. For most restroom facilities, 304L is the most cost effective solution. It provides good corrosion resistance in non-salt water environments. 316L is preferred by our customers that are located near or on the ocean. Navy ships and public facilities at beaches should opt for the 316L material.
Toilet Paper Capacity:
The AA-HRTDx3E Vandal Resistant High Capacity Stainless Three Roll Toilet Paper Holder accommodates three toilet paper rolls up to 5-1/8" diameter. It is suitable for both standard core and coreless paper products. This washroom accessory is also drip deflective that will protect the paper from errant water during hose down cleaning.
ADA Compliance:
The AA-HRTDx3E Vandal Resistant Stainless Commercial Toilet Paper Dispenser is ADA compliant when properly mounted and installed.
Customers of this Product:
This is an entirely new product line that is just entering into production. At a recent vendor show at Lake Arrowhead it was well received by facility managers because of its clean design and more affordable price point.
Dimensions:
- 16 ⅝” x 5 ¾” x 5 ⅝” (WxHxD)
Material Options:
- 12 gauge 304L Stainless Steel
- 16 gauge 304L Stainless Steel
- 12 gauge 316L Stainless Steel
Model Names:
- AA-HRTDx3E-304L-12g
- AA-HRTDx3E-304L-16g
- AA-HRTDx3E-316L-12g
Finish:
- Stainless Steel Satin # 4 Finish
Mounting:
- 3/8" Mounting Hole Placements
Capacity:
- 3 Standard Core 5-1/4"
- 3 High Density 5" Coreless
Installation:
Secure fixture to wall with appropriate 3⁄8” Stainless Steel anchoring hardware for optimal installation strength (not provided). Recommend 3⁄4” or greater back bracing for walls. Partitions may require T-nuts or other suitable anchoring devices. When possible it is recommended that units be through bolted back-to-back providing optimal installation strength.
Guide Specification:
Dispenser shall be constructed with American made, 12 or 16 gauge 304L or 12 gauge 316L Stainless Steel joined /w TIG welds and edges de-burred. Dispenser shall not be cross-metal contaminated during manufacturing construction. Dispenser housing shall provide protective cover for tissue paper against drip and spray. Protective shroud adds security for padlock. Dispenser shall have 3⁄8” mounting holes. Dispenser shall accept multiple paper styles. 12 Gauge models shall include a 10 year standard or 20 year optional functional warranty against vandalism when properly installed & locked while in service. 316L SS shall be used for US Navy maritime use or if exposure to salt water is prevalent.
Made to Order Items
All of Vandal Stop Products are made by hand in the USA using American-sourced stainless steel. While some products might be available in stock, most are made to order. Our general estimated lead times are:
- Quantity 1 - 10 = ~4 to 6 weeks for production
- Quantity 11 - 50 = ~4 to 8 weeks for production
- Quantity 51 - 100 = ~6 to 10 weeks for production
- Quantity 101 - 200 = ~10 to 16 weeks for production
- Quantity 200+ = Call for estimate
Winter Months Production
Due to holidays and winter weather, some production delays may occur during the months of November, December, January, and February.
Supply Chain
Due to increased demand, more time be required for production. If you have a critical delivery date requirement, please call or email to verify lead times prior to placing an order.
Stocked Items
For certain items that we sell often, we do our best to either keep inventory on the shelf or keep a constant production cue going. For items that are considered "stocked" we will generally be able to ship within 5 business days or less.
Why Are Stocked Items More Expensive?
We're adapting to your needs! While we specialize in made-to-order products, we recognize the growing demand for immediate availability. Adjusting to this requires foresight in demand anticipation, material procurement, initiating stock production, and warehousing—all incurring additional costs. Consequently, our stocked items are priced to reflect these overheads. For customers who can accommodate a production lead time, we're pleased to offer discounted pricing as a thank you for your flexibility.
Billing
Credit Card orders will be charged at the time of checkout. If you wish to be billed when your order ships, you can use the "Pay by Purchase Order" option on the payment section of checkout. You will be asked to upload a PDF copy of your Purchase Order along with a reseller certificate of tax exempt status is applicable. We will invoice you once your order has been shipped.
For more information, contact us or read our full Production Lead Times Policy.