Heavy-Duty Wood Mounting & Warranty Compliance
Vandal Stop fixtures are engineered from heavy 12-gauge stainless steel to withstand severe physical attacks. However, a vandal-resistant fixture is only as strong as its anchor to the wall. Standard drywall anchors and lightweight screws will quickly fail under pry or impact loads, pulling out of the substrate and compromising your facility.
To qualify for our 10-Year Anti-Vandalism & Anti-Theft Warranty, all units must be installed using heavy-duty 3/8" diameter mounting hardware anchored directly into solid structural backing. This kit provides the commercial-grade stainless steel security lag screws required to meet our warranty standards specifically for wood substrate applications.
This hardware kit is intended exclusively for wood installations. Lag screws cannot be used directly in hollow masonry, concrete, cinder block, or metal partitions without separate, dedicated anchoring systems. Standard sheetrock screws or plastic drywall anchors are strictly prohibited and completely void warranty coverage.
What’s Included in This Kit
- (4) 3/8" Diameter x 3" Long Stainless Steel Security Lag Screws: Deep coarse-thread wood fasteners featuring proprietary tamper-resistant security drive heads to deter unauthorized removal.
- (4) Heavy-Duty Stainless Steel Washers: Evenly distribute clamping force across fixture mounting slots without deforming the backplate.
- Coverage: Secures one standard fixture (mirrors, toilet paper dispensers, paper towel dispensers, waste receptacles) or two liquid soap dispensers (which utilize two mounting points each).
Substrate Hardware Requirements
Verify your wall construction prior to installation. Different wall types require completely different fastener classes:
- Wood Studs & Solid Blocking (Compatible with this kit): Pre-drill pilot holes and drive these 3/8" x 3" security lag screws directly into solid wood studs, structural wood blocking, or minimum 3/4" structural plywood backing.
- Concrete & Cinder Block / CMU (Requires different hardware): These lag screws are not masonry anchors. Concrete and masonry installations require dedicated 3/8" masonry expansion anchors, heavy-duty sleeve anchors, wedge anchors, or lag shields rated for structural loads.
- Metal Toilet Partitions (Requires different hardware): Hollow metal partitions cannot support lag threads. Installation requires 3/8" diameter through-bolts paired with tamper-resistant sex bolts (barrel nuts) installed back-to-back.
Warranty & Anti-Theft Criteria
- Anti-Vandalism Warranty: Units must be secured with 3/8" diameter fasteners into solid structural backing. Installations relying on 1/4" hardware, #10 screws, or hollow drywall anchors are excluded from warranty coverage.
- Anti-Theft Warranty: Requires tamper-resistant security fasteners (such as the registered-pattern screws in this kit) or 3/8" commercial hardware permanently bonded with high-strength thread-locking compound (Loctite).
For detailed substrate-specific anchoring procedures and fastener specifications across all wall types, consult the Vandal Stop Installation & Mounting Guide.